NCC energy monitoring, made simple and affordable.
PhaseLink is an all-in-one energy management box that electrical contractors install on commercial jobs. Standard off-the-shelf hardware, our own software hub, and a live dashboard that works fully offline.
PhaseLink gives contractors a fast, low-cost way to tick the energy-monitoring box, and gives owners clear energy visibility without a full building management system.
You need to meet NCC energy-monitoring requirements on commercial jobs without blowing the budget or the program. PhaseLink is one box, standard hardware and a quick commissioning process.
You want simple, reliable visibility of where the energy goes, without the cost and complexity of a BMS.
All of the features below are built and working today.
Power, Lighting, Mechanical, Lift, Hot Water, Renewable, EV Charging, Battery and Other.
Consumption, solar generation and net in real time, plus the site's peak demand.
Energy history charts, 15-minute billing-grade intervals and CSV export for reporting.
Modbus TCP and MQTT. The Shelly Pro 3EM is the first supported meter, with more brands planned.
No internet or cloud needed. PhaseLink keeps accurate time even without an internet connection.
Restarts and keeps recording on its own, with crash-safe storage and automatic daily backups.
Admin, master and viewer logins, so everyone sees what they need and nothing more.
An admin page to add devices, so commissioning doesn't need a specialist integrator.
Commercial off-the-shelf hardware with PhaseLink's own software hub, built from scratch.
PhaseLink is designed to meet the energy-monitoring requirements of NCC Section J for Australian commercial buildings. Energy is recorded against the NCC load categories, at 15-minute intervals, and kept on site.
Compliance requirements depend on the building and its approval documents. Confirm the energy-monitoring requirements for each project with the project's designer or certifier.
Standard meters report to the PhaseLink box over your site network. The box stores the data and serves the dashboard locally, with no cloud in the middle.
Mount the all-in-one PhaseLink box on site. It's built from standard, off-the-shelf hardware.
Wire in supported meters and connect them over Modbus TCP or MQTT, starting with the Shelly Pro 3EM.
Use the admin page to add each device and assign it to its NCC load category.
Set up admin, master and viewer logins. The site is recording and the dashboard is live, with no internet required.
Big industrial energy management systems are built for big budgets. PhaseLink is built for the job in front of you.
Priced well below the big industrial EMS brands, so energy monitoring doesn't eat the margin.
One box and a simple admin page mean contractors can deploy in hours, not weeks.
Standard hardware and open protocols (Modbus TCP, MQTT) instead of proprietary kit.
No ongoing subscription and no cloud dependency. The data stays on site, on the PhaseLink box.
PhaseLink is growing. These capabilities are on the roadmap.
Support for more meter brands beyond the Shelly Pro 3EM.
Large multi-meter sites of 50 to 200+ meters.
Visibility down to individual circuits.
Sub-metering and billing for tenancies.
PhaseLink is a budget energy management system (EMS) for Australian commercial buildings. It's an all-in-one box, made of commercial off-the-shelf hardware and PhaseLink's own software hub, that electrical contractors install on site.
Yes. PhaseLink is designed to meet NCC Section J energy-monitoring requirements. It records energy by NCC load category at 15-minute billing-grade intervals. Always confirm project-specific requirements with the designer or certifier.
No. PhaseLink works fully offline with no internet or cloud needed, and it keeps accurate time without an internet connection.
PhaseLink talks to standard meters over Modbus TCP and MQTT. The first supported meter is the Shelly Pro 3EM, and more brands are planned.
PhaseLink restarts on its own and keeps recording. Data is held in crash-safe storage with automatic daily backups.
Yes. Energy history can be viewed as charts and exported to CSV, with 15-minute intervals.
There are three login levels: admin, master and viewer. Admins can add devices through the admin page.
PhaseLink is built to be quick to install, so contractors can deploy it in hours, not weeks.
Large multi-meter sites (50 to 200+ meters), circuit-level monitoring and tenant sub-metering and billing are on the roadmap and coming soon.
No. There's no ongoing subscription and no cloud dependency. PhaseLink runs on site, on its own box.
Tell us about the building, the number of meters and your timeline, and we'll come back to you.
PhaseLink · Site dashboard